Huawei AR500 Series Manual page 428

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
Numb
er
3
4
5
Interface Description
Console interface
The console interface can connect to an operation terminal for onsite configuration.
3-398
Table 3-398 Console interface attributes
Attribute
Connector type
Standards compliance
Working mode
Data equipment type
Cable type
Issue 10 (2019-03-06)
Indicator/ Color
Button
ALM Red
LAN GE Green
electrical
interface
indicators
(GE0 to Yellow
GE3)
LAN 2.5GE Green
optical
interface
indicators
(GE4 to
GE5)
lists console interface attributes.
Copyright © Huawei Technologies Co., Ltd.
Description
When no USB flash drive is connected to the
router, the ALM indicator works as the system
indicator:
l Steady on: A system fault has occurred and
requires manual intervention.
l Off: The system is running properly.
When a USB flash drive is connected to the router,
the ALM indicator works as the USB indicator:
Steady on: USB-based deployment has failed.
Steady on: A link has been established on the
interface.
Off: No link is established on the interface.
Blinking: Data is being transmitted or received on
the interface.
Off: No data is being transmitted or received on
the interface.
Steady on: A link has been established on the
interface.
Blinking: Data is being transmitted or received on
the interface.
Off: No link is established or no data is being
transmitted or received on the interface.
Description
RJ45
RS232
Full-duplex Universal Asynchronous
Receiver/Transmitter (UART)
Data circuit-terminating equipment (DCE)
6.18 Console Cable
3 Chassis
Table
499