Huawei AR500 Series Manual page 146

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
1
3
5
7
9
11 CONSOLE interface
13 Two SIM card slots of LTE0
15 Two SIM card slots of LTE2
Indicator Description
Figure 3-33
Issue 10 (2019-03-06)
LTE3 antenna interface
GPS/BDS antenna interface
LTE0 antenna interface
Power input jack
NOTE
Use a DC power cable to connect the router
to an external power source.
USB interface (host)
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
shows the indicators on the AR503EQGW-L.
Copyright © Huawei Technologies Co., Ltd.
2 LTE2 antenna interface
4 LTE1 antenna interface
6 Two Wi-Fi antenna interfaces
8 LAN interfaces: four GE electrical
interfaces
NOTE
l LAN interfaces GE0 to GE3 can be
configured as WAN interfaces.
l GE0 is a management interface and is
used to upgrade the router.
10 RST button
NOTE
This button is used to reset the router.
l To restore the factory settings, hold down
the button for at least 5 seconds.
l To reset the system, press the button.
Resetting the router will interrupt services.
Exercise caution when deciding to press this
button.
12 Ground point
NOTE
To protect the router from lightning and
interference, reliably ground the router using
a 6.8 Ground Cable.
14 Two SIM card slots of LTE1
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
16 Two SIM card slots of LTE3
NOTE
l The SIM card slots support double-card
single-standby.
l The router must use industrial SIM cards.
3 Chassis
217