Huawei AR500 Series Manual page 350

Huawei
AR500&AR510&AR531&AR550&1500&AR2500
Industrial Switch Routers
Hardware Description
antenna interface helps improve quality of received LTE signals.
of an LTE antenna interface.
Table 3-315 LTE antenna interface attributes
Attribute
Connector type
Standards compliance and
frequency bands supported
Rate
Cable type
GPS Antenna Interface
A GPS antenna interface can connect to a GPS+LTE remote diversity antenna to provide the
GPS positioning function.
Table 3-316 GPS antenna interface attributes
Attribute
Connector type
Frequency bands supported
Cable type
GE Electrical Interface
A GE electrical interface (10/100/1000 Mbit/s auto-sensing) transmits and receives Ethernet
services at 10 Mbit/s, 100 Mbit/s, or 1000 Mbit/s.
electrical interface.
Issue 10 (2019-03-06)
Description
SMA-K (screw threads outside and a hole inside)
l FDD LTE: bands 1/2/3/5/7/8/20
l WCDMA/HSDPA/HSUPA/HSPA+: bands 1/2/5/8
l GSM/GPRS/EDGE: 850/900/1800/1900 (MHz)
l Frequency Division Duplexing (FDD) LTE: uplink
rate of 50 Mbit/s and downlink rate of 100 Mbit/s
l Dual Carrier High Speed Packet Access Plus (DC-
HSPA+): uplink rate of 5.76 Mbit/s and downlink rate
of 42 Mbit/s
l High Speed Packet Access Plus (HSPA+): uplink rate
of 5.76 Mbit/s and downlink rate of 21.6 Mbit/s
l LTE primary antenna interface:
remote antenna
l LTE diversity antenna interface:
diversity antenna
Table 3-316 lists attributes of a GPS antenna interface.
Copyright © Huawei Technologies Co., Ltd.
Table 3-315
Primary LTE
GPS+LTE remote
Description
SMA-K (screw threads outside and a hole
inside)
1575 MHz
GPS+LTE remote diversity antenna
Table 3-317 lists attributes of a GE
3 Chassis
lists attributes
421