Adjusting The Resolution And Contrast - Sharp FACSIMILE User Manual

Adjusting the Resolution and Contrast

Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a document.
The default resolution
setting is STANDARD
and the default
contrast setting is
AUTO.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
STANDARD Use STANDARD for
ordinary documents.
This setting gives you
the fastest and most
economical
transmission.
FINE Use FINE for
documents containing
small letters or fine
drawings.
SUPER FINE Use SUPER FINE for
documents containing
very small letters or
very fine drawings.
HALF TONE Use HALF TONE for
photographs and
illustrations. The
original will be
reproduced in 64
shades of gray.
82
You must adjust the settings
each time you don't want to use
the default settings.
Contrast settings
AUTO Use AUTO for normal
documents.
DARK Use DARK for faint
documents.
1
Load the document(s).
•
The document must be loaded
before the resolution and contrast
can be adjusted.