Timer Operations - Sharp FACSIMILE User Manual

Timer Operations

Timer Operations
The Timer function allows you to set a transmission and/or polling operation to be
performed automatically at a time you specify. One transmission operation and one
polling operation can be set at any one time, and the times they will be performed
can be specified up to 24 hours in advance.
♦
You can use this function to take advantage of lower off-peak telephone rates
without having to be there when the operation is performed.
Note: Only a Speed Dial number can be used to dial the receiving machine.
Setting a timer operation
1
Press these keys:
FUNCTION
TIMER MODE
2
Press # to set a transmission
operation (SEND MODE), or * to
set a polling operation (POLLING
MODE).
POLLING
3
Press 1 to select SET.
4
Enter the time at which you want
the operation to take place (2 digits
for the hour and 2 digits for the
minute).
0
9
132
1
SEND
or
1
2
5
Example: 9:25
5
Press the START key.
6
Enter the Speed Dial number of the
receiving fax machine.
•
If this is a polling operation, go to
Step 10.
0
7
Press the START key.
8
Adjust the resolution and/or
contrast if desired (skip to the next
step if you don't want to change
settings).
RESOLUTION
START
5
(Example)
START