Sharp FACSIMILE User Manual page 115

Quiet Detect Start Time
This setting can be used to delay the
start of the Quiet Detect Time
function. For example, if you want to
insert a pause at the beginning of
your answering machine's outgoing
message to ensure clear detection of
fax signals, you can use this setting
to delay the start of silence detection
so that the pause will not cause the
fax to take over the line.
Quiet Detect Start Timing has been
turned off at the factory. If you want to
use this function, turn it on by
entering a 2-digit number equal to the
desired number of seconds of the
delay. As general guide, the delay
time should be slightly longer than
the pause before the outgoing
message.
1
Press these keys:
FUNCTION
QUIET START TIME
2
Enter a 2-digit number (from 01 to
15) for the number of seconds of
the delay, or enter 00 to turn off the
function.
0
3
Press the STOP key to return to the
date and time display.
STOP
4
Press
10 times
4
(Example)
Optional A.M. Mode Settings
Off hook hold time
This setting can be used to make the
fax automatically take over the line
and attempt reception after a set
number of second.
For normal operation, we recommend
that you do not turn this function on;
however, if you are having trouble
receiving faxes in A.M. mode, you
can try various time settings to see if
it helps.
1
Press these keys:
FUNCTION
OFF HOOK HOLD
2
Enter a number from 001 to 255, or
enter 00 to turn off the function.
0
3
Press the STOP key to return to
the date and time display.
4
Press
11 times
4
4
(Example)
STOP
113