External Control Connections - ABB ACS 600 Hardware Manual

Appendix A – ACS/ACC 600 Technical Data
External Control
Connections
A-16
Data of the external control connection boards of the ACx 600 product
family are given below.
Analog Inputs ACS 600: Two Programmable Differential
Current Inputs: 0 (4) to 20 mA, R
The advantage of
ACC 600: Two Differential Current Inputs:
the differential
0 to 20 mA, R
analog input is that
the ground potential
ACS 600: One Programmable Differential
of the device or
Voltage Input: ACS 600: 0 (2) to 10 V, R
transmitter sending
200 kΩ
an analog signal
ACC 600: One Differential Voltage Input: 0
can differ up to ± 15
to 10 V, R
V from the ground
potential of the
Common Mode Voltage:
ACx 600 chassis
Common Mode Rejection Ratio: > 60 dB at
without disturbing
50 Hz
the signal.
Differential input
Resolution: 0.1 % (10 bit)
also efficiently
Inaccuracy:
attenuates common
25
mode disturbances
±
coupled to control
cables.
Input Updating Time: 12 ms (ACS 600),
44 ms (ACC 600)
Constant Voltage Voltage: 10 VDC ± 0.5% (Full Scale Range)
Output at 25 °C (77 °F). Temperature Coefficient:
± 100 ppm/°C (56 ppm/ °F), max.
Maximum Load: 10 mA
Applicable Potentiometer: 1 kΩ to 10 kΩ
Auxiliary Power Voltage: 24 VDC ± 10%, Short circuit proof
Output
Maximum Current: 250 mA (130 mA with
NLMD-01 option)
Analog Outputs ACS/ACC 600: Two Programmable Current
Outputs: 0 (4) to 20 mA, R
Resolution: 0.1 % (10 bit)
Inaccuracy:
25
±
Output Updating Time: 24 or 100 ms
(ACS 600), 44 ms (ACC 600)
ACS/ACC 600
NIOC-01 Board
= 100 Ω
in
> 200 kΩ
in
±
15 VDC, max.
±
0.5% (Full Scale Range) at
°
C (77 °F). Temperature Coefficient:
°
100 ppm/ C (56 ppm/ °F), max.
< 700 Ω
L
±
1% (Full Scale Range) at
°
C. Temperature Coefficient:
°
200 ppm/ C (110 ppm/ °F), max.
601/604/607 US Supplement
= 100 Ω
in
>
in