Inquiries - ABB ACS 600 Hardware Manual

Chapter 1 – Introduction

Inquiries

1-4
Character Meaning
no.
17 Degree of Protection
0 = IP 00 (chassis), A = IP 21, 2 = IP 22,
5 = IP 54, 6 = IP 00 with Coated Boards,
7 = IP 22 with Coated Boards,
8 = IP 42 with Coated Boards
9 = IP 54 with Coated Boards
B = IP 21 with Coated Boards
18 Line Input and Protection Options
19 Starter for Auxiliary Motor Fan
20 Filters
0 = CE with EMC Filters (not for 690V or 12-pulse
rectifier) 230V Not CE
3 = CE with output dv/dt Filters + EMC Filters (not for
690V)
5 = Output dv/dt Filters + no EMC Filters
8 = US Standard, US conduit: No CE, no EMC filters,
9 = CE Low Voltage and Machinery Directives; No EMC
(ACx 607 only, secondary of all transformers
220 VAC) (Not valid for XTs with "4" top/top "6" top/
top w/brake chopper.)
A = 8 + dv/dt Filter
21 Braking Chopper and Cabling Direction
0 = No Brake Chopper - Bottom Entry / Bottom Exit
1 = Brake Chopper (Bottom Entry / Bottom Exit)
3 = Input Power Top Entry / Output Power Bottom Exit -
No brake chopper
4 = Input / Output Power Top Entry / Exit - No brake chop-
per (Not valid for XTs with dv/dt filters, EMC filters, or
12 pulse rectifier.)
5 = Option 1 and 3
6 = Option 1 and 4 (Not valid for XTs with dv/dt filters,
EMC filters, or 12 pulse rectifier.)
R = NDCU-XX
22 Other Options
0 = None, 1 = Version 5.x Software, 2 = Version 5.x Har-
monized (ACx 6x7 only), 3 = Version 6.x Software
Any inquiries about the product should be addressed to the local
distributor or ABB representative, quoting the type code and the serial
number of the unit. If the local ABB representative cannot be
contacted, inquiries should be directed to the address and phone
numbers on the back cover of this manual.
Refer to
Appendix A:
Enclosures
Appendix A:
CE marking
601/604/607 US Supplement