Cub Cadet Z-Force SX 54 Operator's Manual page 22

Troubleshooting
Excessive vibration
1. Cutting blade loose or unbalanced.
• Tighten blade and spindle.
2. Damaged or bent cutting blade.
• Replace blade.
Uneven cut
1. Deck not leveled properly.
• Perform side-to-side
deck adjustment.
2. Dull blade.
• Sharpen or replace blade.
3. Uneven tire pressure.
• Check tire pressure in all four tires.
Notes
22 S 4 — P
ection roduct
Tractor will not mulch grass (If equipped w/
mulching kit)
1. Engine speed too low.
•
2. Wet grass.
•
3. Excessively high grass.
•
4. Dull blade.
•
c
are
Place throttle in FAST
(rabbit) position.
Do not mulch when grass is wet.
Mow once at a high cutting height,
then mow again at desired height or
make a narrower cutting swath.
Sharpen or replace blade.