Panasonic KX-MB2061CXB Service Manual page 135

Multi-function printer
Hide thumbs Also See for KX-MB2061CXB:
Table of Contents

Advertisement

DISPLAY MESSAGE
12.1.1. Cordless Handset
DISPLAY MESSAGE
• The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load
paper or remove the jammed paper.
• If the PC fax (feature #442) is set to "ALWAYS",
- check the connection between the computer and the unit.
- check that the computer is turned ON.
• If the fax preview mode (feature #448) is set to "ON",
- view, print or save the received fax documents using the web browser on the computer connected via
the LAN, and then erase the unnecessary documents.
- turn the setting to "OFF". The fax documents stored in memory will be printed automatically.
• There is something wrong with the scanner position. Turn the power switch OFF, then ON. If the problem
cannot be solved, contact our service personnel.
• "Serial Error" means internal data transmission error between CPU(BBIC) and main CPU on main unit.
• You must subscribe to use Caller ID service. Contact your service provider/telephone company for service
availability. Once you receive caller information, this message will not be displayed.
• The toner is empty. Replace the toner cartridge immediately.
• The toner is reaching the end of its life. You will need to replace the toner cartridge soon.
• The top cover is open. Close it.
• A transmission error occurred. Try again.
• Recording was too short. Try again.
• Phonebook copy failed. Confirm the destination unit is in standby mode and try again.
• The destination unit's phonebook memory is full. Erase the unnecessary phonebook items from the desti-
nation unit and try again.
• The cordless handset's phonebook memory is full. Erase unnecessary items.
• There is no room left in memory to record voice messages. Erase unnecessary messages.
• The cordless handset has lost communication with the base unit. Move closer to the base unit and try
again.
• Turn the base unit's power switch OFF to reset the unit. Turn the power switch ON and try again.
• The cordless handset's registration may have been cancelled. Re-register the cordless handset.
• A wrong type of battery such as Alkaline or Manganese was inserted. Use only the rechargeable Ni-MH
battery noted on Optional Accessories P.11.
• You must subscribe to Caller ID service. Contact your service provider/telephone company for service
availability. Once you receive caller information, this message will not be displayed.
The cordless handset is not registered to the base unit. Press [LOCATOR] (
5 seconds, then place the cordless handset on the charger. The cordless handset will be registered to the
base unit.
CAUSE AND REMEDY
CAUSE AND REMEDY
135
KX-MB2061CXB/KX-MB2061CX2/KX-MB2062CXB
) on the base unit for about

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-mb2061cx2Kx-mb2062cxb

Table of Contents