10 Enable For Mqtt Support; Figure 9-5: Tfio-B Module List - ABB RMC-100 Startup Manual
Remote modular controller
Hide thumbs
Also See for RMC-100:
- Startup manual (37 pages) ,
- Quick start manual (2 pages) ,
- User manual (215 pages)
Table of Contents
Advertisement
Figure 9-5: TFIO-B Module List
f.
For specific module setup, expand either TFIO-A Modules or TFIO-B Modules on the
navigation tree and select the desired modules for further configuration.
10 Enable for MQTT support
MQTT supports connection of the RMC-100 to a service provider or private cloud. It may require
authentication certificates for the device. Consult with your IT administrator for configuration options or
requirements when using certificates.
NOTICE – Cybersecurity risk: The RMC-100 is not an internet-facing device. Do not connect
directly to the Internet. An MQTT gateway is required between the Digital Oilfield and the RMC. If
the customer's corporate network firewall is compromised, the RMC-100 would be at risk without
the MQTT gateway.
Enable MQTT and REST (MQTT configuration interface):
On the PCCU Entry mode navigation tree, select Communications>Services
1.
36 | RM C-100 | 2105551MN AD
(Figure
10-1).
Advertisement
Table of Contents
