Expand Serial Communications; Expand With Abb's Xio; Expand With Third-Party Serial-To-Ethernet Module; Figure 7-7: Network Communication For 2 Network Mode - ABB RMC-100 Startup Manual

Remote modular controller
Hide thumbs Also See for RMC-100:
Table of Contents

Advertisement

Figure 7-7: Network communication for 2 Network mode

7.3

Expand serial communications

The RMC supports serial communication expansion through ABB XIOs or third-party Ethernet-to-Serial
devices. Connection with this type of equipment requires networking communication over Ethernet.
Ensure all devices have valid and unique IP addresses. Static IP addressing for devices is recommended.
See section
7.2 Configure Ethernet (network)
7.3.1

Expand with ABB's XIO

The RMC supports serial port expansion through ABB's Extendible IO devices (XIOs). The RMC can obtain
measurement data from peripherals such as measurement transmitters connected to XIO COM ports. The
RMC-XIO combination provides an integrated solution designed to transparently handle devices on XIO
remote ports as if they were local ports on the RMC. The two options to implement RMC-remote device
communication are:
 Use the RMC's XIO Interface application for RMC-XIO communication.
 Use the XIO's Ethernet-to-Serial Passthrough application for RMC-XIO communication.
XIOs can be co-located with an RMC on the same cabinet or be in their own enclosure at a distance from
the RMC in the same field. RMC-XIO communication is over Ethernet. For additional details, refer to the
XIO user manual. See
Additional information
IMPORTANT NOTE: The two configuration options for connection with the XIO (XIO
Interface and Ethernet-to-serial passthrough) provide complete and integrated statistics for
monitoring and troubleshooting. The XIO supports PCCU as the configuration interface for a
fully integrated and seamless solution.
7.3.2

Expand with third-party serial-to-Ethernet module

The RMC also supports serial port expansion through third party Serial-to-Ethernet modules. The RMC
can obtain measurement data from peripheral devices such as measurement transmitters connected to
30 | RM C-100 | 2105551MN AD
communication.
for a link to the document.

Advertisement

Table of Contents
loading

Table of Contents