Huawei LampSite Product Description page 13

LampSite Solution
Product Description
Table 2-4 describes the RHUB3908 indicators.
Table 2-4 RHUB3908 indicators
Indicator
RUN
ALM
ACT
CPRI0/CPRI
1
GE0/1
PWR0~7
01 (2013-11-30)
Color
Green
Red
Green
Red or
green
Green
This indicator
is on
Yellow
only when the
PHS feature
is enabled.
Yellow
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Status Description
Steady on There is power supply, but the RHUB is
faulty.
Steady off There is no power supply, or the RHUB is
faulty.
Blinking on for The RHUB is functioning properly.
1s and off for 1s
Blinking on for The RHUB is loading software,
0.125s and off configuring data, not working, or the
for 0.125s software is in security version.
Steady on Alarms have been generated, and the
device must be replaced.
Steady off No alarms have been generated.
Blinking on for At least one alarm has been reported. The
1s and off for 1s RHUB may have to be replaced.
Steady on The RHUB is activated and functioning
normally.
Steady off The RHUB is not activated.
Blinking on for
The device is under commissioning.
1s and off for 1s
Steady green The CPRI link is functioning properly.
Steady red An optical module has failed to transmit or
receive signals because the optical module
is faulty or the optical fiber is broken.
Blinking red on The CPRI link is out of lock possibly
for 1s and off for because the dual-mode clock sources are
1s (red) not synchronous or the data rates over
CPRI ports do not match.
Steady off The optical module is not detected or is
powered off.
Steady on The connection is set up.
Steady off No connection is detected.
Blinks Data has been transmitted or received.
Steady off No data has been transmitted or received.
Steady on The RHUB is supplying power to the
pRRU properly.
2 Hardware Architecture
9