4.3.2 Messages to be displayed
The following table shows a list of popup notification messages this function outputs.
It should be noted that you can edit those messages. For information about how to edit
messages, see "3.1.4 Editing popup notification messages".
No.
1
A PS fan failure occurs.
2
A front fan failure occurs.
3
A CPU fan failure occurs.
The temperature inside the chassis
4
becomes abnormal.
5
SMART anticipates drive failure.
The value of the drive power-on
6
(=used) hours exceeds the threshold.
Frequent error correction occurs in
7
memory.
8
A RAID error occurs.
Nos. 5, 6, and 8: %1 denotes the drive bay number.
No.5: This includes the case that getting the failure prediction status of the drive fails.
No.7: %1 denotes the name of DIMM.
4.3.3 Popup notification settings
This function can be enabled or disabled in the RAS Setup window. In the default
factory-shipped setting, this function is disabled. If this function is disabled, popup
messages are not displayed.
For details, see "3.1.3 Using the RAS Setup window".
Table 4-8 Messages Displayed
Event
4. CHECKING THE HARDWARE STATUS
Popup notification message
Revolutions of fan at power supply deteriorated
remarkably.
Revolutions of front fan deteriorated remarkably.
Revolutions of cpu fan deteriorated remarkably.
Temperature exceeded prescribed value.
A failure may be imminent on the drive of the drive
bay%1.
Used hours on the drive of the drive bay%1 exceeded
prescribed value.
In the %1, error corrections have occurred with high
frequency.
RAID status is DEGRADE. (Drive bay%1)
4-15