Figure 8-3 Description Of Each Part In The Simulation Tool Window - Hitachi HF-W6500 45/40 Feature Manual

8. SIMULATING THE HARDWARE STATUS
(3) Using the Simulation Tool window
When the RAS software transitions to the simulation mode, the Simulation Tool
window appears as shown in the following figure.
You can use the Simulation Tool window to change the condition of hardware
devices.
When the Simulation Tool window starts, all hardware devices are set to the normal
status.
Shows the name of
a simulated device.

Figure 8-3 Description of Each Part in the Simulation Tool Window

● Target
Shows the name of each simulated hardware device.
Fan condition
Temperature condition
inside the chassis
Drive condition
Memory condition
Shows the currently set
status of the target device.
Click Apply to apply
the "Setting".
Category
PS fan, Front fan, CPU fan
Internal Temperature
Drive bay1, Drive bay2
DIMM A, DIMM B
Click End to exit
the simulation mode.
Target
8-6
Shows a new status
to be simulated.