Raid Consistency Check Command (Raidcheck) [D Model Only] - Hitachi HF-W6500 45/40 Feature Manual

5. CONTROLLING THE HARDWARE
5.4 RAID Consistency Check Command (raidcheck)
The raidcheck command performs a consistency check on the drives in the RAID. This
command can be launched at the command prompt. The following shows how to use this
command.
<Name>
raidcheck - Consistency check on the RAID drives and Progress display
<Syntax>
raidcheck [/START [/q]]
<Description of the function>
The raidcheck command performs a consistency check on the drives in the RAID and
displays the progress of the check. This command offers one of the following functions
depending on a specified option.
• With no options: The progress of the consistency check on the drives in the RAID will
• When the /START option is specified: The command starts a consistency check on the
NOTE
• You need to have administrator privileges to execute the following action. Log
on to the computer using an administrator account and then execute the
command. If User Account Control (UAC) is enabled, start the command
prompt as an administrator according to "APPENDIX A RUNNING
COMMAND PROMPT AS AN ADMINISTRATOR", and then execute the
raidcheck command.
(a) Starting a consistency check by specifying the /START option.
In addition, you cannot execute this action from a remote session.
• Do not run multiple instances of this command at the same time.
be displayed.
5-10
[D Model only]
drives in the RAID.