Table of Contents
Advertisement
<Status check>
(5) Hardware status window
Displays the hardware status of this equipment using a graphical interface. There is always
an icon in the notification area of the taskbar to display the hardware status.
(6) Event notification
Enables a user application to check the hardware status of this equipment by monitoring the
status of event objects.
(7) Popup notification
Notifies a user that an error occurred in the hardware of this equipment by displaying popup
messages.
(8) Status display digital LEDs
The status display digital LEDs are on the front of this equipment and notify a user that an
error occurred in the hardware of this equipment. These LEDs can be used by a user
application in order to, for example, notify the failure of the application.
(9) Remote notification
Enables a remote device to check the hardware status of the equipment. This function also
notifies to a remote device whenever the hardware status changes.
(10) Status acquisition using library functions
This function enables a user application to get the hardware status of this equipment by
using the RAS library.
<Control>
(11) Automatic shutdown
Automatically shuts down the equipment when fan failure, abnormal temperature inside
the chassis, or a remote shutdown signal input is detected. Use "(4) RAS Setup window" to
enable or disable the automatic shutdown function.
Figure 1-2 Hardware Status Icon
1-3
1. CAPABILITIES OF THE RAS FEATURE
Advertisement
Table of Contents
