Current-Only Measurement (Dual-Phase) - GE Multilin EPM 6000 Instruction Manual

CHAPTER 3: INSTALLATION
3.3.9

Current-Only Measurement (Dual-Phase)

Note
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
For this wiring type, select
Even if the meter is used only for current measurement, the unit requires a AN volts
reference. Please ensure that the voltage input is attached to the meter. AC control power
can be used to provide the reference signal.
(3 Element Wye) in the meter programming setup.
3 EL WYE
3–17