Operating Mode; Description - GE Multilin EPM 6000 Instruction Manual

CHAPTER 4: USING THE METER
4.4

Operating Mode

4.4.1

Description

Note
EPM 6000 MULTI-FUNCTION POWER METERING SYSTEM – USER GUIDE
Operating mode is the EPM 6000 meter's default mode. If scrolling is enabled, the meter
automatically scrolls through these parameter screens after startup. The screen changes
every 7 seconds. Scrolling is suspended for 3 minutes after any button is pressed.
Push the DOWN button to scroll all the parameters in operating mode. The active
parameter has the indicator light next to it on the right face of the meter. Push the RIGHT
button to view additional displays for that parameter. A table of the possible displays in the
operating mode is below. Refer to Operating Mode Screens on page 6–3 for a detailed
navigation map of the operating mode.
Table 4–3: Operating Mode Parameter Readings
Parameter
designator
VOLTS L-N VOLTS_LN
VOLTS L-L VOLTS_LL
AMPS AMPS_MAX
W/VAR/PF W_VAR_PF
VA/Hz VA_FREQ
Wh KWH_REC
VARh KVARH_ POS
VAh KVAH
Readings or groups of readings are skipped if not applicable to the meter type or hookup,
or if explicitly disabled in the programmable settings.
Possible display readings
VOLTS_LN_ VOLTS_LN_
MAX MIN
VOLTS_LL_ VOLTS_LL_
MAX MIN
AMPS_MIN AMPS_THD
W_VAR_PF W_VAR_PF
_MAX_POS _MIN_POS
VA_FREQ_
VA_FREQ_ MIN
MAX
KWH_DEL KWH_NET
KVARH_ NEG KVARH_ NET
VOLTS_LN_
THD
W_VAR_PF
_MAX_NEG
4–17