Table of Contents
Advertisement
1 Power Window Switch
2 Exterior Rearview Mirrors and Headlamp Levelling
Adjustment Switch
3 Ignition Switch
4 Wiper/Washer Control
5 Horn Button
6 Driver Airbag
7 Instrument Pack
8 Indicator and Main Beam Stalk Switch
9 Onboard Entertainment System
10 Entertainment Controls
11 Front Passenger Airbag
12 Heating/Air Conditioning Controls
13 Gear Shift Lever
14 Cruise Stalk Switch
*
15 Clutch Pedal
16 Brake Pedal
*
INSTRUMENTS AND CONTROLS
17 Accelerator Pedal
18 Bonnet Release Handle
19 Fuel Filler Flap Release Handle
1
9
Advertisement
Table of Contents
Need help?
Do you have a question about the ZS and is the answer not in the manual?
Questions and answers
how to work wipers
To operate the wipers on an MG ZS:
1. Select Wipe Speeds:
- Move the lever to choose different speeds:
- Intermittent Wipe (1)
- Slow Wipe (2)
- Fast Wipe
2. Single Wipe:
- Press the lever down and release for a single wipe.
- Hold the lever down for continuous high-speed wiping until released.
3. Programmed Wash/Wipe:
- Pull the lever toward the steering wheel to operate the windscreen washers.
- After a short delay, the wipers will activate and continue for three additional wipes after releasing the lever.
- A final wipe happens after a few seconds to clear any remaining fluid.
4. Rear Window Wiper Operation:
- Turn the rear wiper switch to the wash and wipe position and hold.
- The rear wiper will wipe quickly while the washer operates.
- Releasing the switch returns it to intermittent wipe mode, stopping the washer but keeping the wiper in intermittent operation.
5. Wiper Maintenance & Service Position:
- When the engine is off, activate the service position to lift the wipers for maintenance.
Avoid using wipers on a dry or frozen windscreen to prevent damage.
This answer is automatically generated
DIGITAL SPEED INDICATOR
The MG ZS features a digital speed indicator in the instrument pack. It displays the current speed digitally and allows the driver to monitor speed limits. When the Intelligent Speed Limit Assist is enabled, the system detects speed limit signs and shows the current speed limit on the digital cluster. Additionally, the speed assist system can help maintain a set speed, adjusting as needed.
This answer is automatically generated