Fuel Filler; Refueling - MG ZS Manual

Hide thumbs Also See for ZS:
Table of Contents

Advertisement

Fuel Filler

Fuel Filler Flap
The fuel filler flap is located on the rear right-hand wing.
Pull the fuel filler flap release handle under the driver side
instrument pack to open the flap.
STARTING & DRIVING
Fuel Filler Cap
Unscrew the filler cap anti-clockwise and allow any
pressure inside the tank to escape, before removing the
cap.
After refueling, tighten the filler cap clockwise until you
hear 3 "click" sounds.

Refueling

Do not fully fill the tank if the vehicle is to be parked in
direct sunlight, or high ambient temperature - expansion of
the fuel could cause spillage. The fuel filler tube is designed
to accept a narrow, long filler nozzle. There is a cover
at the filler neck, by inserting the filler nozzle thoroughly
before fuel filling, the cover can be fully opened.
Start the engine after fuel filling.
the engine runs unevenly, switch off and seek an MG
Authorised Repairer before attempting to restart the
engine.
4
After refueling, if
181

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ZS and is the answer not in the manual?

Questions and answers

edwards
January 25, 2025

how to work wipers

1 comments:
Mr. Anderson
February 10, 2025

To operate the wipers on an MG ZS:

1. Select Wipe Speeds:
- Move the lever to choose different speeds:
- Intermittent Wipe (1)
- Slow Wipe (2)
- Fast Wipe

2. Single Wipe:
- Press the lever down and release for a single wipe.
- Hold the lever down for continuous high-speed wiping until released.

3. Programmed Wash/Wipe:
- Pull the lever toward the steering wheel to operate the windscreen washers.
- After a short delay, the wipers will activate and continue for three additional wipes after releasing the lever.
- A final wipe happens after a few seconds to clear any remaining fluid.

4. Rear Window Wiper Operation:
- Turn the rear wiper switch to the wash and wipe position and hold.
- The rear wiper will wipe quickly while the washer operates.
- Releasing the switch returns it to intermittent wipe mode, stopping the washer but keeping the wiper in intermittent operation.

5. Wiper Maintenance & Service Position:
- When the engine is off, activate the service position to lift the wipers for maintenance.

Avoid using wipers on a dry or frozen windscreen to prevent damage.

This answer is automatically generated

BOB ANDERSEN
March 20, 2025

DIGITAL SPEED INDICATOR

1 comments:
Mr. Anderson
March 20, 2025

The MG ZS features a digital speed indicator in the instrument pack. It displays the current speed digitally and allows the driver to monitor speed limits. When the Intelligent Speed Limit Assist is enabled, the system detects speed limit signs and shows the current speed limit on the digital cluster. Additionally, the speed assist system can help maintain a set speed, adjusting as needed.

This answer is automatically generated

Table of Contents

Save PDF