Lenovo ThinkSystem SR550 Setup Manual page 81

Figure 47. M.2 drive air baffle installation
After installing the M.2 drive, M.2 backplane and the air baffle, use the Lenovo XClarity Provisioning Manager
to configure the RAID. For more information, see:
http://sysmgt.lenovofiles.com/help/topic/LXPM/RAID_setup.html
Adjust the retainer on the M.2 backplane
Use this information to adjust the retainer on the M.2 backplane.
"Read the "Power off
"ATTENTION:
installation the server
Static Sensitive Device
Guidelines" on for this task"
Ground package before opening"
page 46 on page 90 on page 48
Before adjusting the retainer on the M.2 backplane, locate the correct keyhole that the retainer should be
installed into to accommodate the particular size of the M.2 drive you wish to install.
To adjust the retainer on the M.2 backplane, complete the following steps:
Watch the procedure. A video of the adjustment process is available:
• YouTube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-C9jFjZnXQ6AmTXaIdX6_HJ
• Youku:
http://list.youku.com/albumlist/show/id_50429987
.
Chapter 3 Server hardware setup
77