Start-Up And Validation Test; Contents Of This Chapter; Validation Of The Safety Functions; Competence - ABB Q951 User Manual

Start-up and validation test

Contents of this chapter

This chapter describes the start-up, validation test procedure, and validation of the safety
function.

Validation of the safety functions

You must do a validation test to make sure that the safety function operates correctly and
according to the safety requirements.

Competence

￭
The person who does the validation test of the safety function must be a competent person
with expertise and knowledge of the safety function and functional safety. This person must
document and sign the test procedures and report.

Validation procedure

￭
You must do the validation test using the checklist given in this manual:
• at the initial start-up of the safety function
• after changes related to the safety function (wiring, components, safety function -related
parameter settings, etc.)
• after maintenance work related to the safety function.
The validation test must include at least the following steps:
• you must have a validation test plan
• you must test all commissioned functions for proper operation, from each operation
location
Start-up and validation test 43
7
12