Exclusion Of Liability; Quick Reference Guide For Implementing A Safety System; Related Documents - ABB Q951 User Manual

Emergency stop functions with button monitoring foracs880 liquid-cooled drives

Hide thumbs Also See for Q951:

Table of Contents

12 Introduction to the manual

Exclusion of liability

ABB is not responsible for the implementation, verification and validation of the overall safety

system. It is the responsibility of the system integrator (or other party) who is responsible

for the overall system and system safety.

The system integrator (or other responsible party) must make sure that the entire

implementation complies with the instructions in this manual, all relevant standards, directives

and local electrical code, and that the system is tested, verified and validated correctly.

Task

Do a risk assessment according to the relevant standards or regulations, such as ISO 12100.

Select the applicable functional safety standard for the implementation.

Assess safety: analyze and evaluate risks and define risk reduction strategies. Define the safety re-

quirements.

Design the safety system. The part of the design made by ABB is shown in this manual.

Connect the wiring. See the wiring instructions in this manual and the circuit diagrams delivered with

the drive.

Set the parameters related to the safety function (as listed in this manual).

Do the validation test. You can find instructions for the validation test in this manual.

Document the validation test procedure. You can find the guidelines for the validation test report in this

manual.