7.
Set the link refresh settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Basic Settings] [Link Refresh Settings]
8.
Set the supplementary cyclic settings as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Application Settings] [Supplementary
Cyclic Settings]
9.
Set the target station number of the remote device initial setting as follows.
[Navigation window] [Parameter] [Module Information] [RJ61BT11] [Basic Settings] [Initial Settings]
10.
Double-click "No. of Registered Procedures" to open the "Remote Device Initial Setting Procedure Registration" window.
7.1 Example of Communications Between a Master Station and a Remote Device Station
7 COMMUNICATION EXAMPLES
7
47