Key Wipe Transition - Panasonic AV-HS6000 Series Operation Manual

f Manual transition:
Operate the fader lever to execute transitions manually. If the fader lever is operated during auto transition, auto transition will be switched to
manual operation when the fader lever position overtakes the amount of the transition being executed.
f Cut transition:
Press the <CUT> button to execute the transition instantaneously.
Setting the key transition mode
Transition mode and transition time can be set separately for key in and key out.
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Transition] tab.
2
Select [MIX] or [WIPE] in the [In Type]/[Out Type] column.
f Select the transition mode.
3
Select an item in [Transition] in the [In Type]/[Out Type] column.
[Off]
[On]
4
Set [Time] in the [In Type]/[Out Type] column.
f Set the transition time. Set the transition time as with background transitions.
5
Select an item in [In=Out] in the [Out Type] column.
[Off]
[On]
Operating in the KEY operation area
r Operating the <KEY1 TRNS> to <KEY4 TRNS> buttons
Press the <KEY1 TRNS> to <KEY4 TRNS> buttons to execute a transition with the transition type and transition time of respective keys which have
been set on the menu.
The <KEY1 TRNS> to <KEY4 TRNS> buttons flicker during key in, and light when the transition is complete. If the <KEY1 TRNS> to <KEY4 TRNS>
buttons are pressed while key in is complete, transition of the key image (key out) is executed.
The <KEY1 TRNS> to <KEY4 TRNS> buttons light during key out, and go off when the transition is complete. If the <KEY1 TRNS> to <KEY4 TRNS>
buttons are pressed during the transition, the transition direction is reversed.
r Operating the <KEY1 ON> to <KEY4 ON> buttons
Press the <KEY1 ON> to <KEY4 ON> buttons to turn on/off respective keys with cut transition.

Key wipe transition

Set the pattern and position of key wipe transition on the menu.
1
Select the <ME1>/<ME2> button → [KEY1] to [KEY4] → [Key Pattern] tab.
2
Set [In] and [Out] in the [Key Pattern] column.
f This setting is not reflected when PinP is enabled.
[In]
[Out]
3
Select an item in [Sync] in the [Key Pattern] column.
[Separate]
[Link]
4
Set [X‑Pos] and [Y‑Pos] in the [In Position]/[Out Position] column.
f Set the start position of the next pattern waveform.
- WIPE: 11, 12, 13, 14, 15
- SQ: 41, 42, 43, 44, 45, 46
5
Select an item in [In=Out] in the [Out Position] column.
[Off]
[On]
Chapter 5 Basic Operations — KEY
Disables the transition mode of key in or key out except manual transition.
Enables the transition mode of key in or key out.
Sets the [In Type] column and the [Out Type] column separately.
The [In Type] column setting becomes the same as the [Out Type] column setting.
Select the wipe pattern for key in.
Select the wipe pattern for key out.
Sets the wipe patterns for [In] and [Out] separately.
Matches the wipe pattern of [Out] to the wipe pattern of [In].
Sets the start position of pattern waveform separately for key in and key out.
Sets the start position of pattern waveform for key out to the start position of pattern waveform for key in.
– 63 –