Setting The Source Name; Setting The Source Name Display Panel; Setting The Multiview Display - Panasonic AV-HS6000 Series Operation Manual

Setting the source name

Setting the source name display panel

Set the display of the source name display panels on the crosspoint area and KEY/DSK operation area.
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default]
[User]
[Picture]
Displaying a desired source name
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select [Name] in the column that displays the source name to be set.
f Enter a desired name with the on-screen keyboard.
Loading bitmap data
Set the bitmap data to be displayed when [Picture] of the [Type] item is selected from the <CONF> button on the top menu → [SOURCE NAME] →
each column of the [Panel Name] tab. There are two methods: generating the bitmap data from the input signal and loading the bitmap data from a local
computer.
Generating the bitmap data from the input signal
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select [Get Src Picture] in the column that displays the source name to be set.
f Bitmap data is generated from the input signal and displayed in the source name display panel.
Loading bitmap data from a local computer
Load the bitmap data from a local computer connected to the <LAN> terminal of the Main Frame AV-HS60U1/AV-HS60U2.
1
Select the <CONF> button → [SOURCE NAME] → [Load Picture] tab.
2
Select [Load from Local] in the column that displays the source name to be set.
f Load operation can be performed by opening the file operation screen on the computer.
f By selecting the file on a computer, the bitmap data is loaded to the unit and displayed in the source name display panel.
r Bitmap data specification
PNG format file with a 42×58 pixel size is loaded. Color image data is converted to gray scale when being loaded.
NOTE
@
t Bitmap data cannot be loaded from a memory card inserted in the memory card slot of the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4.
Setting the lighting status when the crosspoint area is off
1
Select the <CONF> button → [SOURCE NAME] → [Panel Name] tab.
2
Select an item in [Color Group] in the column that displays the source name to be set.
f Select an item from [ColorGroup1] to [ColorGroup8].
For details, refer to "Setting the colors when the buttons are turned off" (page 152).

Setting the MultiView display

Set the MultiView display.
1
Select the <CONF> button → [SOURCE NAME] → [MV Name] tab.
2
Select an item in [Type] in the column that displays the source name to be set.
[Default]
[User]
[Same as Panel]
Displaying a desired source name
1
Select the <CONF> button → [SOURCE NAME] → [MV Name] tab.
Chapter 7 CONFIG Menu — Setting the source name
Displays the same name as the column name.
Displays a desired name.
Displays bitmap data.
Displays the same name as the column name.
Displays a desired name.
Links to the setting from the <CONF> button on the top menu → [SOURCE NAME] → [Panel Name] tab.
f When [Picture] is selected in the [Panel Name] tab, this setting links to the [Default] setting.
– 132 –