Switcher Mode; Selecting The Switcher Mode - Panasonic AV-HS6000 Series Operation Manual

Switcher mode

Selecting the switcher mode

There are three operation modes (switches modes) of Standard mode, 3G mode, and 4K mode for this unit.
The video formats that can be selected are different for each mode.
1
Select the <SYS> button → [SYSTEM] → [Video] tab.
2
Select an item in the [Video Format] column → [Switcher Mode].
[Standard]
[3G]
[4K]
@ NOTE
t The Main Frame AV-HS60U1/AV-HS60U2 and the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 will reboot when the switcher mode is switched.
Communication between the Main Frame AV-HS60U1/AV-HS60U2 and the Control Panel AV-HS60C1/AV-HS60C2/AV-HS60C4 is interrupted at
this time, so the communication error message is displayed in the menu panel for several tens of seconds. Also, current setting and data in the shot
memory, event memory, macro memory, and video memory are initialized. However, the network setting and the data saved in the storage module are
not initialized.
t It is recommended to save the current setting to the project file before switching the switcher mode.
t The project file from different switcher mode cannot be loaded.
Chapter 9 3G mode/4K mode — Switcher mode
A mode that will operate in following video format.
f HD format:
[1080/59.94i], [1080/50i], [1080/29.97PsF], [1080/25PsF], [1080/24PsF], [1080/23.98PsF], [720/59.94p], [720/50p]
f SD format:
[480/59.94i], [576/50i]
A mode that will operate in following video format.
[1080/59.94p], [1080/50p]
A mode that will operate in following video format.
[2160/59.94p], [2160/50p]
– 163 –