Table of Contents
Advertisement
Installation
* The appliance depth is increased by
approx. 15 mm for refrigeration appli-
ances with wall spacers fitted.
The refrigeration appliance can be built
into any run of kitchen units and in-
stalled directly next to a kitchen fur-
niture housing unit. The appliance front
must protrude in front of furniture fronts
by at least 65 mm. This enables the ap-
pliance door to be opened and shut
without being obstructed. To match the
height of the rest of the kitchen units,
the refrigeration appliance can be fitted
with a suitable top box .
When installed next to a wall , a dis-
tance of at least 40 mm must be main-
tained on the hinge side between the
wall and the refrigeration appli-
ance .
The larger the ventilation gap, the
more economically the compressor
will work.
- A ventilation gap of at least 50 mm
depth must be provided at the back
of the refrigeration appliance behind
the whole width of the top box for air
to circulate.
- The ventilation gap under the ceiling
must be at least 300 cm
that warm air can escape without ob-
struction.
96
2
to ensure
Advertisement
Table of Contents
