Table of Contents
Advertisement
Installation
Changing the lower hinge plate over
Pull hinge pin complete with
washer and adjusting foot upwards to
remove.
Unscrew hinge plate .
Unscrew holder for the soft-close
mechanism.
Remove cover and refit on the op-
posite side.
102
Turn holder through 180°, and
screw it into position in the two op-
posite slots in the hinge plate.
Secure hinge plate on the opposite
side, starting with screw in the
middle at the bottom.
Then screw in the other two
screws .
Reinsert hinge pin complete with
washer and adjustable foot.
The lug on the hinge pin must point to
the back again.
Advertisement
Table of Contents
