Problem solving guide
Message
lights up red in the
display, a fault code F
with numbers appears
and an alarm also
sounds.
lights up red in the
display and an alarm
also sounds.
80
Cause and remedy
There is a fault.
To switch the alarm off touch in the display.
Contact Miele.
To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the dis-
play.
Confirm with
OK
the fault code will be shown again in the display.
The appliance can be switched off directly from the
fault code display.
Touch .
There is an appliance fault: this display always has
priority over any settings which have just been selec-
ted.
An appliance fault has priority over any current door
and/or temperature alarms displayed.
There is a fault with the ice cube maker.
To switch the alarm off touch
Call Service.
To report the fault you need the fault code and also
the model number and serial number of your appli-
ance. You can access these in the display.
To do this touch in the display.
The appliance data required will be shown in the dis-
play.
Confirm with
OK
The ice cube maker can also be switched off in Set-
tings mode.
to exit the information display and
.
in the display.