Labels; Recycling Procedures - GE FineLINE 35 oligo Operating Instructions Manual

2.2 Labels

This section describes safety labels and labels concerning hazardous substances that
are attached to the FineLINE 35 oligo column.
Labels on the instrument
Identification label
FineLINE 35 oligo column has two labels. Both labels show the following information:
•
•
•
In addition, the labels contain the following information
28946841 FineLINE™ 35 oligo Column
Code no: 28946844
Design pressure: 20 bar
Made in Sweden
FineLINE™ 35 oligo Column
Catalog no:
Mfg Year:
Serial no:
Made in Sweden

2.3 Recycling procedures

When taking FineLINE 35 oligo column out of service, the following must be followed:
•
•
•
FineLINE 35 oligo column Operating Instructions 28-9649-57 AA
Product name.
Manufacturing country.
Article number
GE Healthcare Bio-Sciences AB
751 84 Uppsala Sweden
28946841
2009
1234567
The equipment shall be emptied, decontaminated, cleaned and sterilized.
All local regulations shall be followed with regard to scrapping of the equipment.
The different materials must be separated and recycled according to national and
local environmental regulations.
• Design pressure, must never be exceeded.
• Warning triangle - indicates that the
Operating Instructions must be read before
use.
• CE-symbol - shows that the product
conforms with regulations as described in
Section CE marking‚ on page 8.
• Manufacturers name and address.
• Serial number.
• Machine readable identification bar code.
Safety instructions 2
Labels 2.2
15