Advertisement
4 . OPERATION
4 .1 .
Inserting Rivet Nuts
4.1.1
Adjust the working stroke by rotating the sheath anticlockwise to lengthen the working stroke and clockwise to shorten the working stroke.
Note: Model No: AK3985 has a stroke scale to gauge optimum compression (see Fig.1). Only work when the scale indicates 6mm and
below.
Retighten the knurled lock ring.
4.1.2.
Screw a nut onto the mandrel, until it is level with the end of the nut.
4.1.3.
Insert the riveter into the hole and close the handles to rivet the nut. The rivet needs to shorten by approximately 6mm.
4.1.4.
Rotate the thumbwheel anticlockwise to remove the mandrel from the rivet nut.
4 .2 .
Changing the Mandrel (Refer To Fig.2)
4.2.1
Use the tool to remove the mandrel nut, remove the sheath and its washer.
4.2.2.
Place the 12mm cut out spanner over the mandrel and use it to hold down the tube to engage and hold the hex nut. Use a suitable sized
bar placed through the hole in the mandrel to undo it (anticlockwise).
4.2.3. Screw in the new mandrel, refit the sheath, its washer and the mandrel nut, ensure they are all tight before use.
5 . TROUBLESHOOTING
5 .1 .
If the mandrel can not be easily removed from a rivet, do not try to force it as it could cause damage to the riveter. Use a bar and the
spanner to rotate the mandrel anticlockwise to release it from the rivet.
Parts support is available for this product . To obtain a parts listing and/or diagram,
please log on to www .sealey .co .uk, email sales@sealey .co .uk or telephone 01284 757500 .
NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
IMPORTANT: No liability is accepted for incorrect use of this product.
WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required for any claim.
INFORMATION: For a copy of our latest catalogue and promotions call us on 01284 757525 and leave your full name and address, including postcode.
© Jack Sealey Limited
Environmental Protection .
Recycle unwanted materials instead of disposing of them as
waste. All tools, accessories and packaging should be sorted,
taken to a recycle centre and disposed of in a manner which
is compatible with the environment.
Sole UK Distributor, Sealey Group,
Kempson Way, Suffolk Business Park,
Bury St. Edmunds, Suffolk,
IP32 7AR
Original Language Version
www.sealey.co.uk
01284 757500
sales@sealey.co.uk
01284 703534
AK3984 & AK3985 Issue No.2 - 12/06/14
Advertisement
