Advertisement
Removing the Air Filter Protective Cover
7.3
Push the air filter on the air
return side upward obliquely,
remove the air filter from the
slot, and remove the protective
cover from the air filter. Secure
the air filter.
Removing Elastic Cords on the Floats
7.4
8
Post-Installation Check
Item
Content
The cabinet is installed properly, without any tilt. The cabinet should be secured. The
Cabinet
foreign matter inside the cabinet such as cable ties and cable cuts is cleaned up.
Fan
The fan is secured. The fan has no foreign matter inside. The fan blades rotate
properly.
Water system
The water pump is secured reliably and steadily. The water filter is secured reliably
and steadily. The float is secured. The sheet metal fasteners are secured reliably. The
high and low liquid level detector moves smoothly, and elastic cords are removed
from the high and low floats. The water inlet pipe and drainpipe are connected
securely without leakage.
Electrical
Cables are intact and free from sharp bends. No open or short circuit, or incorrect
features
connection occurs in electrical loops. The power cables, signal cable, teamwork
control cable, and the T/H sensor cable for the smart cooling product are connected
as required. The rated specifications of the upstream general switch meet the
maximum current requirement. All cables, connectors, and screws are secured.
Devices are properly grounded.
14
Result
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
□Passed
□Failed
Advertisement
