(Optional) Installing Electric Heater Components
6.5
(1) Electric heater controller (2) Electric heating belt
•
Route the electric heating belt and temperature
sensor probe through the condensate
drainpipe hole, wrap the electric heating belt
around the condensate drainpipe, and ensure
that the temperature sensor probe is closely
attached to the drainpipe.
•
Connect one end of the cable (cross-sectional
2
area: 3 x 1.5
, length: about 11 m) to the
transformer terminal on the electric control box
and the other end to the input terminal of the
electric heater controller. The right figure
shows cable terminal connections.
10