Battery Commissioning; Battery Deployment - Huawei LUNA2000 User Manual

LUNA2000-(5-30)-S0
User Manual
Category

6.3 Battery Commissioning

Download and install the FusionSolar app.
Download and install the latest FusionSolar app by referring to the quick guide for
the corresponding inverter model or the
register the installer and create a PV plant and owner (skip this step if the account
has been created). You can obtain the
the following QR code.
Figure 6-1 FusionSolar App Quick Guide

6.3.1 Battery Deployment

Function
Add a battery and set the working mode on the quick settings screen of the
inverter.
(Optional) Upgrading the Inverter and Dongle
When the app connects to the inverter, a message is displayed, asking you to
upgrade the inverter version. Dongle V100R001C00SPC117 and later versions
support LUNA2000 battery. But the Smart Dongle cannot be upgraded locally. You
need to perform the upgrade through the management system. The operation
procedure will be updated later.
Quick Settings
Step 1 Log in to the FusionSolar app using the installer's account. Tap Quick Settings on
the home screen to add the battery and set the battery working mode. By default,
the battery working mode is set to the maximum self-consumption mode. Tap ? to
view the detailed settings, and select a working mode by referring to
Application Scenarios and
Issue 01 (2020-10-20)
Status (Blinking at Long
Intervals: On for 1s and then
Off for 1s; Blinking at Short
Intervals: On for 0.2s and
then Off for 0.2s)
Green
Steady red
Copyright © Huawei Technologies Co., Ltd.
Description
Battery level. Each bar indicates 10%.
The first three bars indicate the number
of faulty battery expansion modules.
FusionSolar App Quick Guide . Then
FusionSolar App Quick Guide by scanning
Settings.
6 System Commissioning
3
66