Electrical Safety - Huawei LUNA2000 User Manual

LUNA2000-(5-30)-S0
User Manual

1.3 Electrical Safety

Grounding Requirements
●
●
●
●
General Requirements
Before connecting cables, ensure that the equipment is intact. Otherwise, electric
shocks or fire may occur.
●
●
●
●
DC Operation
Do not connect or disconnect power cables with power-on. Transient contact
between the core of the power cable and the conductor will generate electric arcs
or sparks, which may cause fire or personal injury.
●
●
●
Issue 01 (2020-10-20)
For the equipment that needs to be grounded, install the protective earthing
(PE) cable first when installing the equipment and remove the PE cable last
when removing the equipment.
Do not damage the ground conductor.
Do not operate the equipment in the absence of a properly installed ground
conductor.
Ensure that the equipment is connected permanently to the protective
ground. Before operating the equipment, check the electrical connection to
ensure that it is securely grounded.
D ANGER
Ensure that all electrical connections comply with local electrical standards.
Obtain approval from the local electric utility company before using the
equipment in grid-tied mode.
Ensure that the cables you prepared meet local regulations.
Use dedicated insulated tools when performing high-voltage operations.
D ANGER
Before connecting cables, switch off the disconnector on the upstream
equipment to cut off the power supply if people may contact energized
components.
Before connecting a power cable, check that the label on the power cable is
correct.
If the equipment has multiple inputs, disconnect all the inputs before
operating the equipment.
Copyright © Huawei Technologies Co., Ltd.
1 Safety Precautions
4