Installing Internal Dc Terminals - Huawei LUNA2000 User Manual

LUNA2000-(5-30)-S0
User Manual
Step 1 Connect the PE cable to the battery power control modules and battery expansion
modules.
Figure 5-2 Connecting the internal PE cable
----End

5.2.2 Installing Internal DC Terminals

Step 1 Insert the positive and negative connectors delivered with the battery into the
positive and negative battery cascading terminals (B+ and B–).
Issue 01 (2020-10-20)
NO TE
It is recommended that silica gel or paint be used around the ground terminal after the PE
cable is connected.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
51