Loading Device Settings - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

Mobile hand-held measuring device

Hide thumbs Also See for METPOINT BDL portable:

Table of Contents

Operation METPOINT® BDL portable

Main menu  Settings  Device settings System System update  Update channels

Important:

If, subsequent to the channel update, the

METPOINT

BDL portable!

The update of the channels may require a double run and a new start of the system. In this case, a

message (pop-up) will be displayed at the restart.

12.3.2.3.5.4.3 Loading device settings

Main menu  Settings  Device settings System  Loading device settings

Update

METPOINT® BDL portable.

Restart

button appears, it must be pressed to restart the

By means of the

button, the channel and system settings can

be reset to the status of when it was last

saved.

Important:

When the channel and system settings have

been reset, the

the

Restart

button must be pressed.

for the

channels

of the

Loading device settings

button and afterwards

METPOINT

BDL portable

Table of Contents