Virtual Channels Setting; Selection Of The Sensor Type - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

13.2 Virtual channels setting

Main menu  Settings  Sensor settings  Virtual channels

13.2.1 Selection of the sensor type

Main menu  Settings  Sensor settings  Virtual channels  V1
Main menu  Settings  Sensor settings  Virtual channels  V1 Type text field
®
METPOINT BDL portable
Virtual channels (optional)
After having activated the "virtual channels" but-
ton in the sensor setting menu, an overview of the
available four channels will appear.
Note:
Channels are not preset as a standard.
If no sensor was configured yet, the
sensor will appear.
Pressing the text field
enable you to go to the selection list of sensor
types (see next step).
If no sensor was configured yet, the
sensor will appear.
By pressing the Generic
channel is selected.
By pressing the No sensor
nel is reset.
The selection is confirmed by pressing the
button.
Type no
Type no sensor will
Type no
button, the virtual
button, the chan-
OK
75