Illustration Of The Device - Beko METPOINT OCV Installation And Operation Manual

Technical data
6.5

Illustration of the device

1 - Sensor unit
2 - Evaluation unit with user interface (display)
3 - Sampling probe
4 - Union nut
5 - Screw-connection body with G 3/8" external thread
6 - Stationary seal ring (2x)
7 - User interface / touchscreen
8 - Power supply cable for the sensor unit
9 - Power supply cable for the evaluation unit
10 - Signalling cable
11 - Connection signalling cable sensor unit
12 - Connection signalling cable evaluation unit
13 - On / off switch incl. indicator (green LED)
14 - Connection analogue output 4-20 mA (see Chapter 13.5.2, page 60)
15 - Connection Ethernet
16 - Measuring-gas connection "M"
19 - Connection potential-free alarm contact (see Chapter 13.5.1, page 54)
20 - Specification regarding the adjusted operating pressure
16 METPOINT ® OCV