Connection Diagrams Of The Different Sensor Types; Pin Assignment For The Sensor Connection - Beko METPOINT BDL portable Instructions For Installation And Operation Manual

11 Connection diagrams of the different sensor types

11.1 PIN assignment for the sensor connection

An ODU Medi Snap 8 pin is used as a sensor interface connector – reference: K11M07-P08LFD0-6550
.
These are the available connecting leads from BEKO TECHNOLOGIES GMBH:
ODU connector with open ends:
ODU connector with an SDI connecting plug:
Plug and cable configuration:
Connector housing
Plug insert
White
Brown
Green
Yellow
Grey
Pink
Blue
Red
®
METPOINT BDL portable
Connection diagrams of the different sensor types
order no. 4028338, cable length 5 m.
order no. 4028337, cable length 5 m.
Clamping nut
Collet
Leitungslänge 5 / 10 m
+ RS485
- RS485
SDI (BEKO-internal data transmission for all the dew point/consumption sen-
sors)
ANALOGUE IN + (current signal and voltage signal)
ANALOGUE IN – (current signal and voltage signal)
POWER SUPPLY 500 µA
+Uv, 24V DC power supply for sensors
-Uv, GND sensor
View on welding pins of Medi Snap Connector
1 weiss white
2 braun brown
3 grün green
4 gelb yellow
5 grau grey
6 rosa pink
7 blau blue
8 rot red
13