Beko METPOINT BDL portable Instructions For Installation And Operation Manual page 36

Mobile hand-held measuring device

Hide thumbs Also See for METPOINT BDL portable:

Table of Contents

Operation METPOINT® BDL portable

Main menu  Settings  Sensor settings  C1  Right arrow (2

The remaining text fields can be marked in the same manner as is described here, in Chapter

7.3.2.1.2.7 Textfelder beschriften und einstellen

Main menu  Settings  Sensor settings  C1  Right arrow (2

See also Chapter 7.3.2.1.2.2.1 Auswahl des Sensortyps (Beispiel Typ BEKO-Digital Sensor)

Note:

After having confirmed with

Caution:

Reference temperature and reference pressure (setting ex works 20°C, 1000 hPa):

All the volume flow (m³/h) and consumption values (m³) that are indicated on the display refer to 20°C

and 1000 hPa (according to ISO 1217 suction condition).

Alternatively, 0°C and 1013 hPa (=standard cubic meter according to DIN 1343) can also be entered

as the reference. Under no circumstances must the operating pressure or the operating temperature

be entered into the reference conditions!

OK,

the lettering returns to black and the values and settings are accepted.

page)  Text field gas constant

A preset selection of suitable

page)

The text fields with red letters show that

different values, such as the

the

name,

were changed or added.

gas

constants.

diameter

and

METPOINT

BDL portable

Table of Contents