Product Overview; Controls - Toro Z Master 8000 Series Operator's Manual

Product Overview

1. Speed-control lever

2. Controls

3. Fuel cap
4. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
1. Key switch
2. Hopper switch
3. Message display
Figure 4
5. Motion-control levers
6. PTO-engagement lever
7. Parking-brake lever
Figure 5
4. Choke control
5. Throttle control
6. Engine-oil temperature
light and buzzer
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Choke Control
Use the choke control to start a cold engine.
PTO-Engagement Lever
Use the PTO-engagement lever to engage the blades
g233918
and the blower.
Speed-Control Lever
The speed-control lever sets maximum forward speed
of the machine
lever rearward to the N
drive system into neutral.
g035550
12
, R , and S
FF UN TART
22).
5).
(Figure 4). Moving the speed-control
position places the
EUTRAL
. Refer to
to F
LOW AST