Mitsubishi Electric 800 Series Instruction Manual page 73

*1 The contents of the reply code 1 are changed when torque commands are given or the torque is limited (when Pr.544 = "14 or 18").
The upper 4 bits of the reply code 1 are used as the reply code to the torque command / torque limit, and the lower 4 bits are used as the
reply code to the frequency command.
Bit15
Example) The error code is H0030 when the torque command value is outside the setting range.
Bit15
0 0
*2 The data is valid only when the frequency setting command is given.
72
DETAILS OF INPUT AND OUTPUT SIGNALS
Reply code2
0 0 0 0 0
Reply code to
the torque command /
torque limit
Reply code1
1
0 0 0 1
Reply code to
the torque command
Bit0
Reply code to
the frequency
command
Bit0
0 0 0 0