Mitsubishi Electric FR-E700EX Manual page 24

FR Configurator (Inverter Setup Software) (To Be Supported Soon)
(Microsoft ® Windows ® 2000 Professional SP4 or later, XP Home Edition SP2 or later, XP Professional SP2 or later
FR Configurator is software offers an easy operating environment.
It can be utilized effectively from drive unit setting up to maintenance.
(Some functions of FR Configurator may not support the FR-E700EX.)
Parameter setting, monitoring, etc. can be performed on a display of Windows  personal computer.
A personal computer and a drive unit can be easily connected with a USB cable.
(RS-485 communication  using PU connector is also available.)
The drive unit on the CC-Link Network can be set via a programmable controller. (FR-
SW3-SETUP-WE (CC-Link Seamless))
USB connector
USB cable
<How to open the USB connector cover>
Pull the cover in the direction of arrow.
Startup
Desired function can be performed
just after a start-up of the software.
(1) Open the recently used
System File
(2) Perform Easy Setup
(3) Perform each function
(4) Help
Easy setup
From station number to parameter setting, setting with
wizard style dialog (interactive) is available.
Procedure for Easy Setup
(1) System File setting
(2) Communication setting
(3) Drive unit recognition
(4) Control method selection
(5) Motor setting
(6) Start command, frequency
command setting
(7) Parameter setting
Navigation area
In Navigation area, switching
OFFLINE and changing operation mode can
be performed.
(1) Frequency setting and forward/reverse
rotation [Test operation]
(2) Display the connected drive unit in tree
view [System List]
(3) Function setting without regard to
parameter number [Basic setting]
(4) Estimates the cause of trouble, and
suggest counteraction. [Troubleshooting]
 This function is not available with FR-SW3-SETUP-WE (CC-Link Seamless).
FR-SW3-SETUP-WE is available for download (free of charge) from the below URL on the Internet. FR Configurator SW3 (FR-SW3-SETUP-
WE or FR-SW1-SETUP-WE) needs to be installed to the personal computer prior to updating the software. Also, user registration is required
for the download (Registration is free of charge.)
URL http://www.MitsubishiElectric.co.jp/fa/
FR-SW3-SETUP-WE
Windows Vista SP1 or later, Windows
®
Then turn it upward.
ONLINE/
7 supported)
®

Microsoft, Windows, Microsoft Windows2000, Microsoft Windows XP,
Microsoft Windows Vista are registered trademarks of Microsoft
Corporation in the United States and/or other countries.

RS-485RS-232C converter is required.
Monitor area
In Monitor area, drive unit status can be monitored.
Additionally, the three-phase motor current waveform and
position control can be monitored.
(1) Displays monitor data in
waveform. Displays current
waveform with High Speed
graph function [Graph].
(2) Monitors the status of I/O
terminals. [I/O Terminal Monitor]
(3) Displays multiple data in
batch. [Batch Monitor]
System area
In System area, parameter setting, Diagnosis,
Troubleshooting, etc. can be performed.
(1) Parameter reading, writing,
verification, Functional List
and Individual List display are
available [Parameter List].
(2) Displays faults history and
monitor value at each fault
occurrence. [Diagnosis]
(3) Parameter setting
conversion from conventional models [Convert]
Setting wizard
Setting wizard can set parameters with wizard style dialog
(interactive). Inputting or selecting required items for each
function, and parameter setting can be made, without
regard to parameter number.
Help
Displays operating instructions and details of each
parameters.
26