Mitsubishi Electric FR-E700EX Manual page 22

Basic operation of the operation panel
Operation mode switchover
At power-ON (External operation mode)
PU operation mode
(rotation speed monitor)
Parameter setting mode
Value change
Output current monitor
Value change
Parameter clear
[Operation for displaying faults history]
Past eight faults can be displayed.
(The latest fault is ended by ".".)
When no fault history exists,
While a fault is displayed:
The display shifts as follows by pressing
Output current Output voltage
(After Energization time, it goes back to a fault display.)
Pressing the setting dial shows the fault history number.
PU Jog operation mode
Speed setting has been
written and completed!!
STOP
Output voltage monitor
Display the
present setting
Parameter and a setting value
flicker alternately.
Parameter write is completed!!
All parameter
clear
Initial value
change list
is displayed.
: Rotation speed at the fault
Energization time.
(Example)
and speed flicker.
(Example)
Faults history clear
24