10. Attach the radiation sheet (FPGA) removed in step 9 onto a new UC-1 board.
n
Attach the radiation sheet (FPGA) at the center of the FPGA IC. Attach it not so as to protrude from
the FPGA IC.
11. To install, reverse the removal procedure.
Procedure after replacement
Write the data to the UC-1 board. Operate the Color Uniformity Alignment Software under the directions
in the messages on a PC. (Refer to the Manual for Color Uniformity Alignment Software.)
ZRD-1/ZRD-2
4-17 (E)