Speaker Installation
Speaker Components
(HT-TX250 only)
SPEAKER
STAND
How to Install the Speaker on the Stand
1
2
3
4
5
6
14
STAND BASE
Screw (A)
Screw (B)
1
Turn the STAND upside-down and connect it to the
STAND BASE.
2
Insert two screws (A) into the two holes marked with
arrows using a screwdriver as shown in the illustration.
3
Insert a screw (B), into the hole on the rear of the Speaker
STAND.
4
Connect the assembled stand to the SPEAKER.
5
Insert another screw (B) into the hole on the rear of the
speaker using a screwdriver as shown in the illustration.
6
This is the SPEAKER successfully assembled with the
Stand.
•
Make sure that the speaker is installed on a fl at and stable
area. Otherwise it may be easily knocked over.
Connecting the Optional Wireless Receiving Amplifi er
To connect the rear speakers wirelessly, you have to purchase the wireless receiving module and
TX card from your Samsung retailer.
When you have Purchased the Wireless Receiving Module (SWA-3000)
HT-X250
Rear Speaker (L)
WIRELESS RECEIVER MODULE
HT-TX250
Rear Speaker (L)
WIRELESS RECEIVER MODULE
Front Speaker (R)
Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
Front Speaker (L)
Front Speaker (L)
Center Speaker
Subwoofer
Rear Speaker (R)
GB
15