Before Using Your Home Theater; Disc Playback - Samsung HT-TX250 Instruction Manual

Digital home cinema system
Hide thumbs Also See for HT-TX250:
Table of Contents

Advertisement

Before Using Your Home Theater

To Operate your Samsung TV and the Home Theater with the HT-X250/HT-TX250's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
Plug the main unit's power cord into the AC power supply.
Before plugging your system into a main socket, you must checkthe voltage
setting (OPTIONAL). If the voltage of the socket doesnot correspond to the
setting on the rear of the unit, you mayseriously damage your system.
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
5
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTION button on the main unit or DVD button on the remote
to enable DVD/CD playback.
Selecting the Video Format
Press the and hold NT/PAL button on the remote controller for over 5 seconds
while the power is turned off.
By default, the video format is set to <PAL>.
<NTSC> or <PAL> will appear in the display. At this time, press the NT/PAL button
shortly to select between <NTSC> and <PAL>.
Each country has a different video format standard.
For normal playback, the video format of the disc must be the same as the video format
of your TV.
26

Disc Playback

DVD
1
Load a disc vertically into the Disc Insert Hole.
Insert a disc so that the label side faces forward.
Playback starts automatically.
ALL
2
To eject the disc, press the EJECT button.
d To stop playback, press the STOP button during playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
from the beginning.
d To temporarily pause playback, press the PLAY/PAUSE (
To resume playback, press the PLAY/PAUSE (
Depending on the content of the disc, the initial screen may appear different.
Pirated discs will not run in this player because it violates the CSS (Content Scrambling System : a copy protection
system) recommendations.
VCD
CD
) button is pressed, playback starts
) button during playback.
) button again.
GB
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-x250

Table of Contents